Delivery Icon

Next Business Day Delivery

On all Stock items.

Icon of truck

Our Experience

Get advice on any product..

Stuart Turner Mainsboost Flomate

MainsBoost systems are designed to increase peak water capacity in a variety of residential and commercial properties. These are especially useful in properties where water pressure is low, or where peak demand may exceed capacity at times. One such system is the MainsBoost Flomate MBF 60 from St...
Show More
MainsBoost systems are designed to increase peak water capacity in a variety of residential and commercial properties. These are especially useful in properties where water pressure is low, or where peak demand may exceed capacity at times. One such system is the MainsBoost Flomate MBF 60 from Stuart Turner. This product has been created to provide peak flow of 16 litres per minute at 3.2 bar pressure, across the property, until the 60 litre vessel is depleted to a preset cut-off limit. At this point, the MainsBoost Flomate MBF 60 will provide 12 litres per minute until the demand ends, allowing the pressure vessel to recharge. The MainsBoost Flomate MBF 60 is designed to be installed within a standard sized 500 mm kitchen unit. Another MainsBoost system available is the MainsBoost Flomate MBF 12. The MBF 12 is designed for small, low occupancy properties, generally speaking with a single bathroom. The Flomate pump should be connected directly to the incoming mains supply, where it will deliver 1.5 bar of pressure over and above the existing water pressure, with a maximum flow rate of 12 litres per minute. At the other end of the scale, the MainsBoost Flomate 300 boasts a 300 litre tank, which when connected to the mains water supply can help to solve the problem of low or intermittent pressure. This is achieved without needing to install a cold water break tank. This system will deliver a maximum flow rate of 30 litres per minute at 3.0 bar pressure.
Show Less