Flexfiller Midi 150D Single Pump Wall Mounted FC FILL 150D MIDI 17461

SKU
115405
£962.23
-
+
Overview
Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.


Available in single or twin pump configuration.

The Midi is a deep wall mounted, 12 l/min flow rate top-up pressurisation unit with 4 litre break tank.

Attributes

  • Suitable for membrane pressure expansion tank
  • Suitable for compressor-controlled automatic expansion unit
  • Outer pipe diameter 1 return [mm] 21.3
  • Pressure [bar] 1 - 5
  • Height [mm] 485
  • Width [mm] 360
  • Depth [mm] 260
type Dimensions
A
[mm]
B
[mm]
C
[mm]
D
[mm]
E
[mm]
F
[mm]
H
[mm]
K
[mm]
M
[mm]
Flexfiller Midi 125D 230 240 480 500 150 800 330 335 380
Flexfiller Midi 150D - 250D 260 360 485 500 150 800 330 335 380

Flexfiller Midi 150D Single Pump Wall Mounted FC FILL 150D MIDI 17461

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.
Available in single or twin pump configuration.

The Midi is a deep wall mounted, 12 l/min flow rate top-up pressurisation unit with 4 litre break tank.

Application:

  • Commercial.
  • Industrial.
  • Residential.

System Volume (Guide): < 50,000 litres.

  • For system volumes up to 50,000 litres.
  • Break Tank: 4 litre break tank with type AB Air Gap Fluid Cat 5.
  • MODBUS Communication output.
  • System quick-fill mode.
  • Password protection for parameter entry.
  • Pressure settings in 0.1 bar increments.
  • Service reminder option (12 months).
  • Pump pulse option (2 second pulse if inactive for 60 days).
  • Flood protection options.
  • High flow applications (12.0 l/min).
  • Event logging for pump start, individual pump run hours counter, electrical interruption and common alarm.
  • Volt free contacts for common fault, high pressure, low pressure, pump fault, pressure transducer fault.
  • Electric pump, 230V 50Hz 1ph. Colour: White (RAL 9910).

More Information
EAN Code 08712874174610

Technical Specifications

Operating Conditions:
Maximum system temperature: 85 ºC. Maximum ambient temperature: 40 ºC. Relative humidity 95% non-condensing. Noise Rating Data: < 75 dBA.
Factory fit options:
Single or twin pump version. High water level. BACnet communication protocol in place of MODBUS connections.
Certifications and Standards Applied:
PED 2014/68/EU Sound Engineering Practice. IEE - Electrical Safety Guidance. EMC 2004/108/EC. BS 7074 Parts 1 to 3. Machinery Directive 95/16/EC. Electronic Components have been tested and comply with the EMC Directives. EN 61000-6-2: Generic Standards – Immunity standard for industrial environments. EN 61000-6-3: Generic Standards – Emission standard for residential, commercial and light industrial environment. CE marked components, where applicable. WRAS approved float valve to BS1212. IP54 (BS EN60529) rated controller.
Material of Construction:
Cabinet: Mild steel CR4. Float: WRAS Approved Torbeck Side Entry. Break Tank: Stainless Steel 304. Pump: PEDROLLO / ULKA (Unit dependant. See pump details for more information). Connection: Brass / Polypropylene. Pipework: Braided flexihose / EPDM. Finish: Powder coated.