Flexfiller Standard 125D Single Pump Floor Standing FC FILL 125D 17395

SKU
109628
£1,020.95
-
+
Overview

Material of Construction:

  • Cabinet: Mild steel CR4. Float:
  • WRAS Approved Torbeck Side Entry.
  • Break Tank: WRAS Approved Polypropylene.
  • Pump: PEDROLLO / ULKA (Unit dependant. See pump details for more information).
  • Connection: Brass / Polypropylene.
  • Pipework: Braided flexihose / EPDM.
  • Finish: Powder coated.

Flexfiller Standard 125D Single Pump Floor Standing FC FILL 125D 17395

Flexfiller 125D Single Pump

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.
Available in single or twin pump configuration.

The Flexfiller is a floor standing, high flow rate (<18 l/min) top-up pressurisation unit with 18 litre break tank.

Application:

  • Commercial.
  • Industrial.
  • Residential.


System Volume (Guide): < 300,000 litres.

  • For system volumes up to 300,000 litres.
  • Break Tank: 18 litre break tank with type
  • AB Air Gap Fluid Cat 5.
  • MODBUS Communication output.
  • System quick-fill mode.
  • Password protection for parameter entry.
  • Pressure settings in 0.1 bar increments.
  • Service reminder option (12 months).
  • Pump pulse option (2 second pulse if inactive for 60 days).
  • Flood protection options. High flow applications (<18.0 l/min).
  • Event logging for pump start, individual pump run hours counter, electrical interruption and common alarm.
  • Volt free contacts for common fault, high pressure, low pressure, pump fault, pressure transducer fault.
  • Electric pump, 230V 50Hz 1ph (110V 60Hz 1ph available upon request).
  • Colour: Black (RAL 9005).
More Information
EAN Code 08712874173958

Flexfiller 125D

Operating Conditions:

  • Maximum system temperature: 85 ºC.
  • Maximum ambient temperature: 40 ºC.
  • Relative humidity 95% non-condensing.
  • Noise Rating Data: < 75 dBA.

Certifications and Standards Applied:

  • PED 2014/68/EU Sound Engineering Practice.
  • IEE - Electrical Safety Guidance.
  • EMC 2004/108/EC. BS 7074 Parts 1 to 3.
  • Machinery Directive 95/16/EC.
  • Electronic Components have been tested and comply with the EMC Directives.
  • EN 61000-6-2: Generic Standards – Immunity standard for industrial environments.
  • EN 61000-6-3: Generic Standards – Emission standard for residential, commercial and light industrial environment.
  • CE marked components, where applicable.
  • WRAS approved float valve to BS1212.
  • IP54 (BS EN60529) rated controller.
Type

Pump

quantity

Connections Max.
Delivery
Pressure
[bar]
Power
Consumption
[kW]
Full Load
Current
[A]
Weight
[kg]
Order
Code
System
[mm]
Mains
Supply
[mm]
Overflow
[mm]
Flexfiller 125D 1 15 (12" M) 15 (12" M) 22  2.5 0.37 2.6 29 1 17395

Type Dimensions
A
[mm]
B
[mm]
C
[mm]
D
[mm]
E
[mm]
F
[mm]
H
[mm]
K
[mm]
M
[mm]
Flexfiller 125D - 280D 470 320 800 500 150 800 225 550 590
Flexfiller 2160D 600 390 800 500 150 800 225 550 590